Drive Ventura Deluxe Scooter
Key Features:
- Includes both red and blue interchangeable color panels
- Padded, flip-up armrests allow for easy transfers and user access
- Seats have four height adjustments, from 20" to 23"
- Seat can be moved forward or backward using the auto-style seat slide
- 33AH batteries included for maximum range of up to 22 miles
- Captains seats recline, swivel and feature a fold-down backrest and an adjustable height headrest
- Full lighting package includes headlight, front and rear turn signals, rear parking lights and rearview mirrors
- Large plastic front basket with flip-down handle
- Anti-tip wheels for greater safety
- Programmable controller
- Easy free three wheel operation
- Easy-to-adjust tiller
- Rear suspension
- Headlight
Scooter Parts Description:
|
1. Headrest |
2. Seat Back |
3. Armrests |
4. Seat Base |
5. Rearview Mirrors |
6. Control Panel |
7. Basket |
8. Tiller Assembly |
9. Tiller Adjustment Knob |
10. Turn Signals |
11. Headlight |
12. Front Bumper |
13. Seat Swivel & Release Lever |
14. Seat Post |
15. Footboard |
16. Accessory Post |
17. Tail Lights |
18. Freewheel Lever |
19. Anti-tip Wheels |
Control Panel Parts:
|
1. Speed Dial |
2. Headlight Button |
3. Hazard Light Button |
4. Battery Indicator |
5. Indoor/Outdoor Switch |
6. Horn Button |
7. Turn Signals Switch |
8. Throttle |
9. Key Switch |
10. Charge Port |
More On Ventura 3-Wheel Scooter
Assembling Instructions:
|
1. Remove your scooter from its packaging. Loosen the tiller adjustment knob, raise the tiller to the desired angle and retighten the knob. |
|
|
2. By hand, loosen the two knobs that secure the rear shroud to the base of the scooter. |
|
|
3. Lift up on the shroud to remove. |
|
|
4. Connect the red connector on the battery harness to the matching red connector on the main cable. |
|
|
5. Connect the rear light harness on the rear shroud to the main cable on the base of the scooter. |
|
|
6. Replace the rear shroud and reinstall the two knobs removed in Step 2. |
|
|
7. While lifting up on the seat release lever, place the seat onto the seat post. Release the lever and rotate the seat until it locks into place. |
|
|
8. Insert the armrests into the attachment points in the seat frame so that the armrests face forward. |
|
|
9. Attach the front basket by aligning the bracket on the tiller with the mounting holes on the basket. Then push down to secure in place. |
|
|
10. Secure the mirrors to the tiller by inserting the mirrors into the connections points on either side of the control panel and rotate clockwise until secured into position. |
|
|
11. Fully charge the scooter batteries by inserting the round charger connector into the charging terminal on the scooter tiller. Then insert the 3-pronged plug into a standard electrical outlet. Be sure to charge the scooter for 8-10 hours before first time use. |
|
|
12. Before use, make sure that the yellow freewheel mode lever of scooter is in the “drive” position. |
Operating Ventura Scooter:
- After your scooter is assembled, and adjustments have been made you are now ready to operate your scooter.
- The key switch applies power to the control system electronics, which in turn supplies power to the motors. Turn the key switch with the key inserted to turn on your Drive Scooter.
- It is recommended you start at the slowest speed setting when familiarizing yourself with your scooter controls. Once you feel comfortable with the controls, and movement of the scooter you may then increase the speed.
- Rotate the speed knob to the lowest speed setting. Engage the throttle, and begin steering to drive forward, backward, left or right.
- If you want to stop the scooter, release the throttle and it will automatically return to the center position to stop the unit.
- Once familiar with the controls rotate the speed knob to increase the top speed to a comfortable setting.
- When the scooter is turned on, the battery gauge will display red, orange, and green indicators:
- Red: Your scooter should be charged as soon as possible. - Orange: Do not drive your scooter for a long trip. - Green: Your scooter has full battery capacity.
Cleaning Instructions:
- To clean your scooter, use a damp cloth with a mild, non-abrasive cleaner on the plastic and metal parts
- If necessary, clean your scooter with an approved disinfectant safe for use on your unit
- Never hose off your scooter or expose it to direct contact with water
- Never use any chemicals on the upholstery of your seat, this may cause the seat to dry out and crack
Specification
Particulars |
VENTURA318CS |
VENTURA320CS |
Top Speed |
4mph |
4mph |
Top Range |
16 miles |
16 miles |
Turning Radius |
53" |
53" |
Climbing Angle |
7.5 degrees |
7.5 degrees |
Ground Clearance |
2.5" |
2.5" |
Dimensions |
48" x 2.75" |
48" x 2.75" |
Floor to Seat Height |
19.5" to 22.5" |
19.5" to 22.5" |
Seat Dimensions |
18"W x 16"D x 18"H |
20"W x 18"D x 20"H |
Controller |
PG S-Drive 70A |
PG S-Drive 70A |
Motor/Drive System |
24v x 350W x 5100RPM |
24v x 350W x 5100RPM |
Charger |
4A off board |
4A off board |
Brakes |
Electromagnetic |
Electromagnetic |
Front Wheels |
10" x 3" flat free |
10" x 3" flat free |
Rear Wheels |
10" x 3" flat free |
10" x 3" flat free |
Base Weight |
88lb |
88lb |
Battery Weight |
46lb |
46lb |
Seat Weight |
40lb |
40lb |
Total Weight |
174lb |
174lb |
Weight Capacity |
400lb |
400lb |
Warranty
Warranty on Frame: Lifetime, Warranty on Electronic Controller/Drive Train Components: 14 Months, Warranty on Batteries: 12 Months
Related Articles
{{x.ShortDescription}} ...
Share