Pride Heritage XX-Large Two Position Partial Recline Bariatric Chaise Lounger

Why to buy Heritage Partial Recline Chaise Lounger?

• Head & arm covers
• Large dual pockets
• Industry-first hand control with USB charger port
• Removable back
• Quiet & smooth lift system
• Heavy-duty lift actuator & scissor mechanism
• Fire retardant (California specifications bulletin 117-2013)
• Transformer features self-diagnostic electronics with 9 cord
• Note: - Industry-first hand control with USB charger port (not available with Heat and Massage)

Free 1 Year In-Home Service!!
Free Lift gate services included!!

Pride FDA Class II Medical Devices are designed to aid individuals with mobility impairments

Pride Heritage Lift Chair Body Components

Lift Chair Electrical Components

Lift chair is equipped with a low voltage DC electrical system that reduces the standard household alternating current of 100V AC - 240V AC to direct current (24/39V DC). The electrical components include the external transformer, batteries (not included), and hand control. Keep these areas free from moisture at all times.

What to buy with Heritage Bariatric Lift Chairs

• Medline Adjustable Aluminum Cane
• Safepath EZ Edge Transition Rubber Threshold Ramp

How to use Pride Heritage Bariatric Chaise Lounger?

Lift Chair Back Assembly

1. Check that the locking clip on the back of the chair is in the vertical position. Reposition if necessary.
2. Drape the hand control and cable over the chair base, then slide the back onto the base. Ensure the hand control cable is routed through the rear of the lift chair.
3. Push firmly on the top of the back to lock into position. You must hear a click from each side of the chair to ensure the back is locked in properly
4. NOTE: Pull up on the chair-back to ensure that it is locked in place
5. Connect the hand control harness to the lift chair to the lift chair
6. Attach the chair-back to the hook and loop flaps on the bottom of the chair base

Heritage XX-Large Bariatric Chaise Lounger Placement

Follow these steps to position the lift chair in a safe manner:

1. Place the back of the lift chair 30 in. (76 cm) from the nearest obstruction while the chair is in the seated position. This measurement may vary depending on model.
2. Adjust the leg levelers to stabilize the lift chair
3. Install the batteries into the external transformer if applicable. Refer to “Battery Installation” for more information.
4. Position the external transformer on the floor in an open, well-ventilated area where it will not be an obstruction or, if equipped, utilize the optional wall mount.
5. Position the low voltage connection cable where it will not be pinched between the frame and the lift mechanism.
6. Connect the low voltage connection cable to the external transformer if it is not already connected.
7. Plug the power cord directly into the electrical outlet. Do not use an extension cord!

Pride Lift Chair Battery Installation

1. Unplug the external transformer power cord from the electrical outlet
2. Open the marked battery door on the external transformer
3. Install two 9V batteries into the external transformer
4. Replace the battery door

 

 

 

Hand Control Operation
Pride Lift chair hand control is equipped with switches/buttons that control the movement of the chair and/ or heat and massage options. Read the following instructions for basic hand control operation. Please refer to the Heritage Lift Chair Hand Control Quick Reference Guide for more detailed information on your specific hand control.

How to Operate Pride Heritage Two Position Partial Recline Lift Chair?

Follow these steps to properly sit in your lift chair:

1. Make sure that the lift chair is in the standing position.
2. Back into the lift chair and sit in the center of the seat.
3. Activate the DOWN button (switch) to lower the lift chair to a comfortable seated position.

Follow these basic steps to operate your lift chair from the seated position:

1. Activate the UP button (switch) to raise your lift chair to the standing position.
2. Activate the DOWN button (switch) to lower the lift chair to a comfortable seated position.

Follow these steps to recline your lift chair from the seated position:

1. Activate and hold the DOWN button (switch) until comfortably reclined.
2. Activate and hold the UP button (switch) to return to an upright, seated position. Release the button (switch) when the lift chair reaches a comfortable seated position.

Follow these steps to properly stand up from your lift chair:

1. Activate and hold the UP button (switch) to raise your lift chair.
2. Release the button (switch) when the lift chair reaches a height where you can stand up comfortably.

Click Here for Pride Heritage Lift Chair Owners Manual
Click Here for Pride Heritage Lift Chair Brochure
Click Here for Pride Heritage Lift Chair Specification
Pride Heritage Lift Chair FAQ's