Harmar Threshold Portable Ramp

Features

• Harmar Threshold Portable Ramp is easy to install
• With a choice of sizes that simplify entrance over thresholds from 1" to 4"
• Pre-punched holes at the top of each ramp make installation quick and easy
• Hardware provided to secure ramp to surface
• Weight capacity: 600lb

More Information

• Instructions for use:
  - Single ramp application: Standard Threshold and Landing
  a. Slide each section together and insert screw. Assemble the ramp by connecting the individual section.
  b. Place the ramp against the threshold or landing. The adjustable flap should rest on your threshold or landing to provide a smooth surface for your wheels. If the adjustable flap is not used, simply place ramp against the edge of the door runner and attach.
  c. Attach your ramp to the threshold or landing using the holes in either the foot section or the flap. Wood screws, sheet metal screws, or concrete bolts may be necessary for this method. It is also possible to use double face tape or caulking to attach the ramp. Foam rubber or other protective material may be put on the bottom of the legs to protect certain floor surfaces.
  - Multiple ramp application: Uneven Threshold and sliding doors
  There are situations where a second Threshold Ramp may be needed on the inside of the threshold. If so, then the purchase of a second Threshold Ramp of equal or different height will be necessary. Follow instructions for single ramp application when installing second ramp.
  For sliding doors, the flap will not be used. Simply place leg of ramp against edge of door runner and attach per item C in single ramp application section.