Graham-Field Lumex Set N Go Rollator Features
- Designed with multiple height settings on the frame
- The Set n Go Wide allows the seat height to be adjusted from a hemi 19.5" to a standard 23.5" height in 1" increments. This accommodates for a broad range of user heights which in turn offers more comfort for the user when seated
- Comfortable, 15.75" wide, seamless padded seat with zippered pouch under seat for security of personal items
- Ergonomic handgrips offer a comfortable grip
- Adjustable handle height with knobs to secure in place
- Easy to operate locking and quick stop loop brakes (pull up to stop; push down to lock)
- Removable padded back bar with easy release pull knobs
- 8" wheel for both indoor and outdoor use
- 350lb maximum weight capacity evenly distributed
- Velcro strap attached secures rollator frame when folded for storage and transport
- Designed to meet the requirements of HCPCS: E0143 and E0156
- Note: Rollators are not intended to be propelled while seated. Do not use this rollator as a wheelchair or transport device
What to buy with Lumex Set N Go Rollator
How to use Lumex Set N Go Height Adjustable Rollator?
Unpacking Lumex Rollator
Unless the Rollator is to be used immediately, retain box and packaging materials for storage until use is required.
- arefully remove all components from the carton.Inspect all components
- What it includes:
- Quadrangular knob (2 each)
- Triangular knob (4 each)
- Front leg and wheel (2 each)
- Back bar (1 each)
- Seat, seat frame, and pouch (1 each)
- Rear leg and wheel, handle and brake cable (2 each)
Assembling Graham-Field Lumex Rollator
Install the legs
- Lay the Rollator on its side to install the legs.
- Install both front legs: Match leg number to frame tube number and insert leg into the tube until locking button pops into place at appropriate seat height.
- Install both rear legs: Match leg number to frame tube number and insert leg into the tube until locking button pops into place at appropriate seat height.
- Install triangular locking knobs to secure all legs: Insert knob into the hole and turn clockwise until tight.
Warning: ensure all four legs are locked in place at the same height, and leg knobs are tight, before proceeding.
Open the Rollator
- Position the Rollator upright on wheels.
- Open the Rollator frame, and spread the front and rear legs apart.
- Push down on both side crossbars so that locking mechanisms lock the legs open.
- Fold the seat down so that it rests on both seat frame tubes.
Warning: ensure both side crossbar locking mechanisms are locked in place before proceeding.
Install the handles
- Install both handles in frame handle receptacles
Adjust the handle height
- Install the height adjustment knob in the appropriate adjustment hole with knob facing outward; install the nut on the knob and tighten. Repeat for the other side. Ensure both handles are adjusted to the same height.
- Secure both brake cables onto the frame with brake cable clips.
Secure the pouch
- Fasten each snap on the front and back of the rollator to secure the pouch to the seat frame tubes
Install the back bar
- Install both ends of the back bar into the frame back bar receptacles and push down until both locking buttons snap into place
How to Operate Lumex Set N Go Wide Adustable Height Rollator
- Walking With your Rollator
- Stand behind your Rollator with a hand placed securely on each handgrip. Move your Rollator slowly forward and select a pace that is comfortable for you. Always be sure the rear wheels are a few inches ahead of your body.
- Stopping With your Rollator
- The Rollator has loop-locking hand brakes. To slow down, squeeze the hand brakes upward toward the handgrips. To hold the Rollator in a stationary position, push the hand brakes down, away from the handgrips, until the hand brakes lock into place; the rear wheels will be locked in place in a parked position. To release, pull the hand brakes upward toward the handles until the rear wheels move freely.
- To Sit on Rollator Rest Seat
- Push the hand brakes down, away from the handles, until the hand brakes lock into parked position.
- Test the wheels before sitting down to ensure the Rollator will not roll.
- Before sitting, touch the back of your legs to the edge of the seat to ensure proper positioning of the Rollator.
- Hold onto handles if necessary to help you lower your body onto the seat.
- Folding the Rollator for transport or Storage
- Remove accessories, if any.
- Lift the seat, move the pouch out of the way, and pull up on the folding pull strap attached to the crossbar underneath the seat.
- A rollator is ready for transport and storage after folding. You may elect to remove handles before storage. The folding strap can be used to keep the rollator frame folded for storage and/or transport.
- Cleaning and maintenance
- To remove dust and dirt, wipe Rollator gently with a clean, soft, damp cloth.
- Inspect wheels periodically for wear or damage. Verify that wheels are free of hair or any other obstruction to freewheel operation. Inspect caster stems for assembly tightness. Use a clean, soft cloth and a mild soap and water solution to clean, rinse with clear water, then dry with a soft cloth.
Lumex Set N Go Rollator Instruction Manual
GF Lumex Set N Go Rollator Specification
Specifications |
Dimensions |
Width Inside Handgrips |
19.4" (492 mm) |
Overall Depth |
26.9" (683 mm) |
Overall Depth At Minimum Seat Height |
27.5" (699 mm) |
Overall Depth At Maximum Seat Height |
31.5" (800 mm) |
At Minimum Handle Height |
32" (813 mm) |
At Maximum Handle Height |
38" (965 mm) |
Seat Height |
19.5" – 23.5" (495 mm - 597 mm) |
Seat Width |
15.75" (400 mm) |
Seat Depth |
12" (305 mm) |
Casters Diameter |
8" (203 mm) |
Maximum User Weight |
350 lb (159 kg) Evenly Distributed |
Product Weight |
16.5 lb (7.5 kg) |
Lumex Set N Go Warranty
5 Year Limited Warranty
Related Articles
{{x.ShortDescription}} ...
Share