Invacare Deluxe Wide Three Position Recliner

Features of Invacare Deluxe Wide Recliner

• Three easy-to-attain positions: sitting, elevated leg or full recline
• Articulating headrest comfortably supports the neck and head, and makes it easier for user to see visitors
• Excellent durability and superior ergonomic comfort for users up to 400 lbs
• Two rear steering casters may be locked to secure chair in place
• Blow-molded side panels remove quickly, with press pins, for easy cleaning
• Footrests fold completely under chair, allowing the resident to a standing position more easily
• Additional 4" of seat width for user comfort
• Flame retardant upholstery is resistant to fluids and meets California Technical Bulletin 117 standard

Invacare Deluxe Wide Three Position Recliner Owners Manual

What to buy with Invacare 3 Position Recliner?

• Invacare Auto Touch Overbed Table
• Medline Double-Tread Slippers

How to assemble the Invacare Deluxe Three-Position Recliner?

Assembling the Invacare Recliner

 
1.  
2.  
3.  
4.  
5. Remove back frame with back cushion from its carton.
6. Lock the rear casters. Work from the rear of the recliner base. Ensure that footrest is in closed position before installing the back frame with cushion.
7. Lift the Invacare Medical Chair back in an upright position behind the rear seat cross brace.
8. Slide the back tubes into the open tube ends of the rear seat cross brace.
9. Lift the plastic skirt mounted on the bottom of the seat and align behind the rear seat frame crossbrace.
10. Align the holes in the skirt to the holes in the chair back by fastening the hardware.
11. Securely tighten the two hex screws to secure the back cushion to the back frame.

Reclining the 3 Position Recliner

1. While seated in the recliner, grip the armrests and simultaneously lean body weight back and push forward with your arms until a recline position reached.
2. Swing recline lock bar up to chair back and lock into position. 
3. Grasp the armrest with one hand and the push bar with the other hand.
4. Push the back of the chair down slowly until a desired position is reached.

How to replace the parts of Invacare Deluxe Wide Recliner?

Removing the Position Lock Lever of Invacare Deluxe Recliner

1. Remove two screws, nylon washers and locknuts securing the position lock lever to the seat frame.
2. To install, secure the position lock lever to the seat frame with the two screws, nylon washers and locknuts.

Replacing Caster assembly of Invacare Deluxe Wide Recliner

1. Place the recliner on its side to gain access to the existing caster assemblies.
2. Remove the hex screw and locknut that secures the caster assembly to the recliner frame. 
3. Align hole in caster insert with hole in recliner frame and install new caster assembly. Reinsert and tighten the hex head screw and nut.
4. Return the recliner to its upright position

Replacing Caster Wheels of Wide Three Position Recliner

1. Remove axle bolt and locknut that secure the existing caster wheel to the fork. 
2. Remove existing caster wheel from fork.
3. Install the new caster wheel into the fork.
4. Install the axle bolt and locknut and tighten securely.

Replacing Plunger Release Knob of Deluxe Three-Position Recliner

1. Remove glide from end of frame.
2. Remove retaining ring from end of plunger pin. 
3. Slide plunger release knob off the plunger pin. 
4. Lift plunger pin and spring out of the frame tube.
5. Insert new plunger pin and spring into the frame so that grooved end of pin extends below the frame tube. 
6. Place plunger release knob over the plunger pin.
7. Snap the retaining ring into groove of the plunger pin.
8. Replace the glide into the end of the frame.

Removing/Installing the Side Panel of 3 Position Recliner

1. To remove, press the push buttons near the bottom of the right side panel.
2. Hold the push buttons in while pulling the panel outward.
3. Repeat Steps 1 and 2 for the other side panel.
4. To install, slip the top of the right side panel into the mounting tab.
5. Push the side panel upward until the side panel fit into the side frame.
6. Pop the side panel into position when the push buttons are visible, through the push pin holes, near the bottom of the side frame.

Replacing/Installing the Armrest Cushion of Invacare Deluxe Recliner

1. Remove four screws securing the armrest cushion to the recliner frame. 
2. Remove the armrest cushion from the recliner frame.
3. Align the armrest cushion with the recliner frame.
4. To install, secure the armrest cushion to the recliner frame with the four screws.

How to clean the upholstery of Deluxe Wide 3 Position Recliner?

• Ordinary dirt stains: Clean upholstery with warm water and mild detergent to remove superficial soil.
• Ground-in dirt stains: Use soft bristle brush and powdered cleanser or similar detergent. 
• Tar, asphalt or creosote: These will stain and should be removed as soon as possible. Area can be cleaned with kerosene or naptha.
• Chewing gum: Scrape off carefully. Remove remainder with kerosene or naptha. 
• Paint or shoe polish: Remove immediately. Use a white cloth dampened with kerosene, naptha or turpentine.
• Excrement: Remove immediately. Clean with 1:10 mix of bleach and water.