McKesson Lightweight Flip Back Detachable Padded Desk Arm Dual Axle Wheelchair

Features of McKesson Lightweight Dual Axle Wheelchair w/ Flip Back Detachable Padded Desk Arm

• Nylon upholstery is lightweight, and breathable for user's lasting comfort
• Urethane tires are mounted on mag-style, composite wheels to provide durability and a smooth ride over most surfaces
• Precision sealed wheel bearings in front and rear ensure long-lasting performance and reliability
• 8 front caster composite mag-style wheels provide a smooth ride over most surfaces
• Push-to-lock wheel breaks for added security
• Removable, flip-back arms allow convenient positioning at a table/desk and easy transfer while remaining attached to the chair and within user's reach at all times
• Swing away footrests with elevating capabilities are equipped with tool-free adjustable length riggings
• This lightweight chair provides easy transition to hemi-level seat height, allows the rider to use feet to independently propel
• Molded handles for attendant's comfort and secure grip
• Carbon Steel Frame with Silver Vein Finish
• Not Made with Natural Rubber Latex

Parts Description

1. Back upholstery
2. Armrest
3. Side panel
4. Front rigging
5. Foot plate
6. Fork
7. Caster wheel
8. Wheel lock
9. Handrim
10. Rear wheel
11. Handgrip

 

Frequently Bought Together

• Multi-Mount Drink Holder
• McKesson Foam Gel Seat Cushion
• Savant Wheelchair Headrest
• Armrest Pad Covers

How to use Mckesson Lightweight Wheelchair?

To Open Chair

• Open the wheelchair by tilting to one side and pushing down on the seat rail until fully opened.

To Close/Fold Chair

• First fold foot plates to vertical position.
• Grab seat with both hands at front and back edge and lift.
• Or, tilt chair to one side and lift up on seat rail.

Removable Arms

• Remove arms by depressing spring button and lifting arms out of front and rear sockets.

Wheel Locks

• Engage both wheel locks before getting in or out of chair, leaning forward in chair, or while in an elevator or wheelchair lift.
• Proper adjustment of wheel lock is at least 1/8” when locked.
• Locks are engaged by pushing handle completely forward.
• Adjustments to locks are made by loosening or tightening nut on the carriage bolt.
• Embed lock shoe at least 1/8” by sliding clamp toward rear wheel while handle is engaged in locked position.
• Tighten nut and bolt to secure in position.
• Test for correct locking action before actual use.

Tires

• Solid rubber tires need minimal maintenance, but should be cleaned occasionally with a damp cloth.
• Replace if tires become severely worn or cracking appears.

Front Casters

• Casters should be checked periodically and lubricated occasionally.
• Lubricate by removing fork and greasing caster stem bearings.
• Lubricate wheel bearings by removing wheel from fork.
• Reassemble fork and wheel by tightening nuts until no play remains, but wheels roll freely.
• If nut is too loose, caster will shimmy, if too tight, chair will be hard to steer.

Removal of Swing-away Foot Rests/Leg Rests

• Release lock by pushing on the front rigging lever.
• Swing-away foot rest /leg rest out and sideways.
• Lift to remove.

McKesson Dual Axle Wheelchair User Manual

Frequently Asked Questions

What is the material of the frame?

The frame is made of lightweight aluminum.

What is the seat height of the wheelchair?

The seat height can be adjusted to either 17.5 inches or 19.5 inches thanks to the dual-axle design.

Are the armrests detachable?

Yes, the flip-back, detachable padded desk arms can be easily removed.

Are the tires inflatable?

No, the tires are solid and low-maintenance, meaning they won't go flat and don't require frequent inflation.

Is the wheelchair foldable for storage and transport?

Yes, the wheelchair is foldable for easier storage and transport.

Is the wheelchair suitable for outdoor use?

Yes, the wheelchair is designed for both indoor and outdoor use, thanks to its 24-inch wheels that provide a smooth ride over rough surfaces.