Med-Lift 35 Series Lift Chair
Med-Lift 35 Series Lift Chair

Med-Lift 35 Series Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge
  • FSA Approved
  • Made in USA

Med-Lift 35 Series Lift Chair is a bariatric chair with larger dimensions. This chair has a weight capacity of 500 lb and features the attractive button-tufted backrest. The back has 8 interlocking webbing strips providing superior support while the Acella-Flex foam seating has an additional 1.5" thickness for extra support.

Buy this product and earn 115.9 Reward Dollars.

Item# 3555

  • Color
    View Color Swatches
  • Chaise Pad
  • Vibrators With Heat
  • Snap on head pillow
  • Delivery Option
  • Total: $1719
    Total: $1159
Total: $1719
Total: $1159

Give me a Better Price


  • Med-Lift 35 Series Lift Chair has two way recline
  • Designed for a person 5 feet 2 inches or taller, up to 6 feet 3 inches
  • Extra bracing in frame, extra frame pieces in frame for added support
  • Low-volt quiet motor
  • Fiber filled back
  • 1.5" added to thickness of Acella-Flex foam seating for extra support
  • 8 No-Sag seat spring
  • Magzine pocket on right side
  • Arm and head covers
  • Super sagless extra heavy duty lift mechanism
  • Custom designed heavy duty reclining hardware
  • 500 lbs Capacity
  • 4 and 6 vibrate systems have separate hand controls
  • 6 vibrator must have chaise pad option
  • Chairs with heat/massage option could take upto 2 weeks to ship
  • Construction Material:
    - Fiber: 5%
    - Foam: 10%
    - Fabric: 10%
    - Steel: 30%
    - Fasteners and miscellaneous: 5%

More Information

  • Chair Frame:
    - All kiln dried hardwood.
    - All stress points are kiln dried oak.
    - All joints are glued and connected with steel fasteners.
    - Uni-construction of seat-back assembly independently lab tested for strength and durability.
    - Gang nails are used at all other critical joints or stress points.
    - All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts).
    - Bolts go entirely through the wood.
    - No lag screws are used to secure the mechanism.
    - Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair.
    - All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut.
    - All wood screws that are used are the best and strongest available.
    - Corner blocks are used throughout the chair at all critical points for added strength.
    - An extra rail is used across the top of the seat back to help keep the back straight and square.
  • Acella-Flex foam:
    - The foam used in all chairs is Acella-Flex, which was developed by Leggett and Platt for use in better upholstered furniture.
    - Acella-Flex foam is the closest thing to a perfect seating configuration.
    - This foam basically pushes back one pound for every pound of weight exerted against it. This characteristic makes the chair, basically, sit the same for a person weighing 90 lbs. as for a person weighing 300 lbs.
    - The Acella-Flex will retain 99.9% of its original shape and size. Most conventional foam will shrink 10-15% in size over the first few years.
    - Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward.
    - As an added benefit to foam, a super soft layer is glued on top of the Acella-Flex which gives a very nice feel to the seat, while still giving the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure-reducing.
    - This particular model has an extra 1.5" of thickness of the Acella-Flex Foam added to the seating for additional support.
  • Seat Springs:
    - 8 gauge Morley system, no sag springs.
    - The springs are tied together with tie wire to make every spring work together as a seat unit.
    - Seat springs are correctly spaced on the spring rails by a special clip rail machine.
    - The front seat rail on the frame is larger and thicker, which makes the seat much stronger and durable.
    - There is a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen.
    - Back has 8 interlocking webbing strips for superior support.
    - To ensure that the seat springs do not cut into the bottom of the seat, a nova bond pad is used.
  • Back Fiber:
    - The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry.
    - This feature makes the back retain their original shape and gives greater comfort when seated.
    - All fabric used on the Med-Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly.
    - Independent lab tests are conducted on fabrics, foam and fibers once a year to ensure that they meet correct specifications.
  • Lift Base:
    - The foundation of the chair is the lift base. After testing all the lift bases, it has been determined that the Super Sagless lift base (made in the USA) is the best available.
    - While more expensive, it will withstand constant use and abuse of a lift chair.
    - A lift base must be as wide as the base of the chair.
    - The Super Sagless base we use is the most stable base in the upright lifted position.
    - This model features a heavy duty low volt quiet motor and has specially designed heavy duty reclining hardware.


 Options3555 (2 Way)
Overall Width40"
Overall Depth42"
Overall Height44"
Overall Reclined Length65"
Front of ottoman to Back of Seat42"
Seat Width between arms27"
Seat Depth22"
From Seat to Top of Arm6"
Seat Height from Floor19.5"
Back height from Seat28"
Ottoman Height from Floor21"
Weight capacity500 lbs
Recommended height range5 feet 2 inches or taller, up to 6 feet 3 inches


4 Years warranty

Customer Reviews

Questions & Answers

Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using