Prism FGA-700 Bariatric Floor Lift

Features

• Prism FGA-700 Bariatric Floor Lift components:
  - FGA-700 Bariatric floor lift
  - Hand Control
  - Floor Lift Integrated Charger
  - Charger Cord
  - Owner Manual
  - Warranty Card
  - Multi-Function Wrench
  - 5 mm Hex Allen Key (Short Arm)
  - 4 mm Hex Allen Key (Short Arm)
• Lightweight, aluminum construction for ease of maneuvering and navigational capabilities
• Power mast and base control for ease of operation
• Lifting range allows for client to be lifted from the floor
• The mast can be assembled in three different height mounting positions to enhance the maximum or minimum height desired
• 360° turn capability of the carry bar delivers the most caregiver control during lifting and positioning without interference with the mast or boom
• Control Box comes standard with diagnostic capabilities and can be used with your laptop for reporting and tracking of lift usage
• Standard with support bars for gait and ambulation training. Can be rotated out of the way when not needed or in use
• Unique four points double carry bar has a quick release attachment with spring loaded clips to secure sling straps
• Bases come with 4 x 5 inch caster combination for maximum control and maneuvering
• The FGA-700 is a lifting aid used by health care professionals to transfer clients. The floor lift makes it possible to move mobility impaired individuals with minimal strain or risk to the caregiver while providing complete safety, dignity, and comfort for the client
• The FGA-700 Bariatric floor lift is one of two components that make up this technology. The other component, the sling, is a specially designed fabric accessory that attaches to the floor lift by means of a carry bar and straps and holds an individual while the lift or transfer takes place. The sling is generally supplied with the floor lift at the initial time of purchase
• The FGA-700 has the ability to lift an individual up from one location such as a bed, then move the individual to another location and finally lower the individual into a chair or bath. The functions of lifting up or down, or opening and closing the legs on the lift, are accomplished by pressing buttons on the hand control. The hand control is attached to the floor lift. Due to the design of the floor lift system, it takes very little effort to press a button to perform the desired motion
• Click Here for User Manual

More Information

• Cautions:
  - Under no circumstance should the FGA-700 and sling (s) be put in control of a person who has not been properly trained in the use and care of this equipment. Failure to adhere to this warning may result in serious injury to the operator, and/or the individual being lifted/ transferred
  - The FGA-700 Bariatric floor lift and sling (s) are not toys. Do not use it for unsafe practices. Do not allow children to play with the floor lift or any of its components
  - The manufacturer warranty is voided if persons unauthorized by Prism Medical Ltd. will perform work on the FGA-700 Bariatric floor lift
• - There are no user serviceable parts inside the actuator. Do not remove cover screws, or open the unit, as this will VOID THE WARRANTY
  - Never expose the FGA-700 Bariatric floor lift directly to water. Warranty does not cover any misuse or abuse of the floor lift system
  - To maintain optimum function, the FGA-700 should be inspected and maintained on a regular basis
  - Any accessories used with the FGA-700 including sling (s), should be checked to ensure that they are in good working order. Check for signs of wear or fraying prior to use. Report any unusual wear, or damage immediately to your local authorized Prism Medical Service Provider
  - The FGA-700 Bariatric floor lift and associated sling (s) are intended only for lifting and transferring of a person. Prism Medical will not be responsible for any damage caused by the misuse, neglect or purposeful destruction of the lift, and/or its associated components
  - In any circumstances do not exceed the maximum allowable load of this lift
  - There is a risk of explosion if the lift is used in the presence of flammable anesthetics
  - Ensure that a clear space is maintained around the lift. Move any obstacles out of the way before operating the floor lift
• Care:
  - Do charge the battery whenever possible. This will extend the battery life. A large number of cycles can be obtained from operating on the batteries, but battery lifetime is reduced with frequent discharging
  - Do inspect all cables particularly the mains power cable on the charger for any damage; replace where necessary
  - Do stow the handset and if fitted with charger, the mains power cable when transporting the hoist
  - Do clean the actuators, control box, charger, battery and handset at regular intervals to remove dust and dirt
  - The exterior of the lift should only be cleaned, disinfected and sterilized using isopropyl alcohol
  - Damp a cloth with isopropyl alcohol and wipe down entire exterior of lif
  - No other chemicals and/or liquids should be used to clean, disinfect and sterilize this lift
  - Do not allow the batteries to fully discharge before connecting to the charger. The batteries are a lead acid gel cell type that can be trickled charged continuously (batteries used for standby) and have a high current discharge capacity. Life is greatly reduced by deep or complete discharging of the batteries. Longer lifetime is obtained by maintaining fully charged batteries
  - Do not continue to operate the handset by repeatedly pressing the buttons if the lift function will notmove or the actuator will not function. If this occurs then the actuator has either reached its end position,the load is too great or there is a malfunction
  - Do not exert excessive force on the handset cable as this may break off the wires inside the cable andprevent some or all of the operations
  - Do not continually operate the hoist functions. The system is not designed for continuous operation.Continuous Operation will cause batteries to be deeply discharged or to damage the actuator or controlbox by overheating