Winco Three Position Lifecare Recliner

Winco Three Position Lifecare Recliner Features

• Provides unsurpassed quality and durability
• Comfortable padded backrest
• Armguard keeps upholstery free from scuffs and damage
• Smooth, round, powder-coated steel frame
• Optional, non-porous tray, stores on side of chair
• Heavy-duty 5" total lock casters (in rear) allow for better handling and control
• 3 position lock-bar allows for safe, comfortable positioning
• Plastic side panels help to create a "safe zone" for patient care without pinch points
• Built-in hand-grips
• Note:
  - SilverTex is not recommend for applications involving frequent contact with bodily fluids where bleach is the preferred or required cleaner. Bleach is not advised for cleaning SilverTex

Winco Lifecare Recliner User Manual
 

How to Use Three Position Lifecare Recliner?

Installation of the Back

• After checking your product for any shipping damage, chair needs to be positioned upright on level surface. Remove packing material and hardware. Cut tape and plastic with scissors, being careful not to damage upholstery.
• Slide the Back Frame over the 7/8" tubes of the Seat Frame.
  Note: To ease assembly, spray the Seat Frame Rail ends with WD-40.
• Depress the 1/4" Snap Button in Seat Frame while pushing down on one side of Back Frame.
• Repeat procedure on opposite side until both Snap Buttons are snapped into corresponding holes of Back Frame.
  Note: Snap buttons must protrude out of holes on back frame.

Operation of the Chair

• Non-Restraint: To make the chair permanently non-restraint, remove the Snap Button of the Right Tray Arm, and unbolt the Position Lock Bar from the back of the chair.
• Position Lock: Attendant may hold the chair in a reclined position by engaging the Position Lock. To safely accomplish this, recline the chair to the 2nd or 3rd recline position and lower the position lock with your hand until the notches on the Position Lock bars engage with the Position Lock Pins. To release Position Lock, raise the Position Lock off of the Pins and return chair to upright position.
• To ensure proper operation of the reclining mechanism, lubricate all pivot points with a silicone lubricant at least twice yearly.

Operation of the Tray

• Tray Arms are inserted into the Tray Receiving Tubes (under Armrests on chair). The Tray automatically locks into the first position, depress the Snap Button (on Right Tray Arm) for 2 more positions.
  Note: Left and right is based as if you are seated in chair.
• The Right Tray Arm is movable to compensate for minor variations in the width of the chair.
• Storing the Tray; Insert the left tray arm tube into the right tray receiving tube and the Snap Button will lock it into place. Allow the right side of the table to hang down vertically on the right side of chair.

Cleaning Instructions

• Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap and water solution and a damp cloth on a regular basis (especially where skin and hair make contact with upholstery). 
• Avoid harsh detergents or chemicals that could damage the upholstery or finish of your recliner. 
• If the furnishings upholstery is disinfected with chemicals or bleach, the chair must be wiped off using only clean water on a damp cloth and then be allowed to air dry. 
• Failure to rinse upholstery with clean water can result in a build-up of residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and eventually can lead to cracking.