Drive 870 Mini Oxygen Regulator

Features

• Drive 870 Mini Oxygen Regulator features barb outlet
• Intended for the administration of oxygen to patients who need increased oxygen levels to improve their breathing conditions
• Facilitates an easier fit into oxygen carry bags
• Lightweight and durable design
• Meet or exceed accuracy standards for ASTM, American National and CGA
• Inlet pressure: 300 to 3,000 PSI
• Outlet pressure: 50 PSI
• Connection: 870
• UL Approved
• Liter flow increments:
  - 18301GM: 0.12, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6 and 8
  - 18302GMN: 0.12, 0.5, 1, 1.5, 2, 3, 4, 6, 8, 10 and 15
• Color: Green

More Information

• Usage:
  - Be sure the regulator is in the "off" position by rotating the knob counterclockwise to the "0" position
  - For safety, be sure you are not directly in front of or behind the regulator when opening the cylinder valve
  - SLOWLY turn the cylinder valve (counter clockwise) about one full turn
  - If you can hear a hissing sound, there is a leak in the system
  - Turn the cylinder off and turn the regulator on to relieve any built up pressure
  - Try tightening the regulator to the cylinder and opening the cylinder again
  - If this does not help, shut the system down again and contact a service representative
  - NEVER attempt to repair a regulator or cylinder yourself