Invacare 9000 XT 16 Inch Lightweight IVC Manual Wheelchair

Name: Invacare 9000 XT 16 Inch Lightweight IVC Manual Wheelchair
Brand: INVACARE CORPORATION
SKU: 45951
Price: 759.99 USD
Availability: InStock

Brand/Manufacturer: INVACARE CORPORATION

FSA Approved

Invacare 9000 XT 16 Inch Lightweight IVC Manual Wheelchair is simply the most versatile lightweight wheelchair available, boasting an extensive offering of frame styles, seat-to-floor heights, back styles, widths, depths, frame colors and a wide range of options and accessories. It features urethane rear tires, mounted on no-flex wheels for superior performance and offset axle position that allows adjustment of center-of-gravity to increase maneuverability or stability to meet each users skill level.

Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

6 Payments: Starts From $126.67

Shipping Charges Applicable

Item #	Desc	Pkg	Reward Earn reward dollars on every purchase you make. Redeem them on your next order. Reward $	Price	Price
9XT_PTO_29154	16"W x 16"D With Fixed Height Space - Saver Desk Arm	Each	$22.80	$907.95 $759.99

Invacare 9000XT Manual Wheelchair Features

Intended for indoor and outdoor use on firm surfaces free of climbing obstacles
Urethane casters for lightweight and smooth ride
High performance, low maintenance and low total lifetime cost wheelchair
Provides stability to meet each user skill level
Multiple frame color variations for customizing
Combines the strength and durability
Easy-to-clean nylon upholstery
Dual-axle allows for user to self-propel or be propelled by a caregiver
Click Here For User Manual

Note: 9000 XT wheelchair components are interchangeable with all other 9000 series and Invacare Tracer series chairs.

How to fold and unfold the Invacare 9000XT Wheelchair?

Unfolding:

Tilt the wheelchair towards you (raising the opposite wheel and caster off the ground/floor).
Place your hand on the top of the seat rail closest to you where the seat upholstery is attached.
Point your fingers and thumb to the inside of the wheelchair.
Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks.
Engage both wheel locks, open the footrest/legrest for clearance and transfer into the wheelchair.

Folding:

Swing footrest/legrest in the locked position to the front of the wheelchair.
Pivot footplates upward to a vertical position.
From behind the wheelchair, grasp the right hand edge of the solid seat. Raise the seat to the hinged side.
With both hands, grasp the middle of the front and back edges of the solid folding seat and lift up until the wheelchair begins to close.
Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armrest towards you.

How to Clean 9000XT Wheelcahir?

Hot water and a mild detergent on soft cloth should be used for cleaning metal surfaces
Wipe down with damp cloth
Dry surface by wiping down with dry cloth
Car polish and soft wax can be used to remove abrasions and restore gloss Warranty Limited

Specification

Particulars	Specification
Overall Width	23"
Dimensions	Folded Width: 11.3"
Seat Width	16"
Overall Height	34"-38"; 1" increments
Back Height	15"-19"
Overall Depth	Overall Depth w/o Riggings: 31"
Seat Depth	16"
Seat To Floor Height	17.5"-19.5"
Product Weight Capacity	250 lb.

Warranty

5 year on Frame and cross braces
1 year on all components

Customer Reviews

Please enter your and your friends email address below.

Fields marked with * are compulsory


Your Name: *	Error msg
Your Email Address: *	Error email
Friend's Name: *	Error email
Friend's Email Address: *	Error email
Message:
Captcha:	Hcaptcha Gcaptcha
	Submit Cancel