Invacare Tracer EX2 16" x 16" Frame With Removable Desk Length Arm Wheelchair
Invacare Tracer EX2 16

Invacare Tracer EX2 16" x 16" Frame With Removable Desk Length Arm Wheelchair

Brand/Manufacturer: INVACARE CORPORATION
Save
Authorized Retailer Badge
  • FSA Approved

Invacare Tracer EX2 16" x 16" Frame With Removable Desk Length Arm Wheelchair features a true dual axle position that allows for repositioning the 24 inches rear wheels and 8 inches casters for adult and hemi seat-to-floor heights. It has durable, low-maintenance, carbon steel frame which is long-lasting.

>

Footrests shown in the picture are sold separately

Product image for illustration purposes only, actual product may vary.

Item #DescPkgPrice 
TREX26RP 16" x 16" Wheelchair Without Footrest or Legrest Each $250.52 $159.99
TREX26RP-T93HAP Wheelchair with Hemi Footrests and Aluminum Footplates Each $265.85 $179.99
TREX26RP-T93HCP Wheelchair with Hemi Footrests and Composite Footplates Each $265.85 $179.99
TREX26RP-T94HCP Wheelchair with Hemi Elevating Legrests and Composite Footplates with Padded Calf Pads Each $280.65 $199.99
TREX26RP-T94HAP Wheelchair with Hemi Elevating Legrests and Aluminum Footplates with Padded Calf Pads Each $280.65 $199.99

Features

  • Invacare Tracer EX2 16" x 16" Frame With Removable Desk Length Arm Wheelchair has 14-gauge crossbraces that add strength and durability
  • Urethane rear tires mounted on "no flex" wheels offer superior performance
  • Low-maintenance, dual-sealed precision bearings
  • Heavy-duty inner liners keep seat and back from stretching
  • Removable, desk-length, padded arms for easy transfers
  • Folds for convenient travel and storage
  • Attractive, silver vein finish
  • Meets RESNA standards for manual wheelchairs in product performance
  • Also Available Separately:  
    - Invacare Hemi Footrests with Composite Footplates and Heel Loops (T93HCP)


Click Here For User Manual

More Information

  • Adjusting Footplate Height:
    1. Remove the front rigging assembly.
    2. Pull the cam lock lever up to unlocked position.
    3. Push in the release buttons and reposition the footplate assembly to the desired height.
    4. Ensure that the release buttons fully protrude from holes on both sides of the front rigging support.
    5. Rotate cam lock lever down to locked position.
    6. Repeat this procedure for the other footplate, if necessary.
    7. Reinstall the swingaway front rigging assembly.
  • Adjusting Seat Depth:
    1. Remove the existing seat upholstery from the wheelchair.
    2. Remove the two plug buttons from the ends of the crossbraces that are towards the front of the wheelchair.
    3. Install the two seat extension tubes into the ends on the crossbraces. Line up the rear mounting hole of the seat extension tube with the second mounting hole from the end of the crossbrace.
    4. Install the two seat extension spacers onto the two seat extension tubes.
    5. Install the new seat upholstery onto the wheelchair. Make sure to line up the mounting holes in the seat extension tubes and seat extension spacers with the new seat upholstery.
    6. Install plug buttons into the ends of the seat extension spacers.
  • Adjusting the Seat Width:
    1. Remove the existing back and seat upholstery from the wheelchair.
    2. Remove the four button screws and locknuts that secure the two pivot links to the wheelchair frame and crossbraces.
    3. Remove the two button screws, locknuts and crossbrace saddle that secures the bottom of the crossbrace to the wheelchair frame. Repeat for other crossbrace.
    4. Remove the hex screw, coved washers, washers and locknut that secure the two crossbraces together.
    5. Assemble the two new crossbraces together with the existing hex screw, coved washers, washers and locknut. Securely tighten.
    6. Determine the correct pivot link and mounting hole to use with the desired seat width.
    7. Secure the pivot links to the crossbraces and wheelchair frame with the four button screws and locknuts. Securely tighten.
    8. Reinstall the two button screws, locknuts and crossbrace saddle that secures the bottom of the new crossbrace to the wheelchair frame. Repeat for opposite crossbrace. Securely tighten.
    9. Install the new back and seat upholstery onto the wheelchair.

Specification

Particulars

Dimensions

Overall WidthOverall Width: 23.25" - 28.25"
Folded Width: 11.5"
Seat Width: 16"
Overall Height:Overall Height: 35.88"
Back Height: 16"
Overall Depth:Overall Depth W/O Riggings: 31.88"
Seat Depth: 16"
Seat To Floor Height:17.5", 19.5"
Casters and wheelsCasters: 8"
Wheels: 24"
Product weight43lb
Weight capacity250lb
Dimensions32" x 13" x 38"

Warranty

5 years warranty

Customer Reviews

Questions & Answers


 
 
question image
Can this chair be adjusted to provide a wider seat area and if so, how?
Eileen - 3/9/2016 2:01:35 PM
facebooktwitter
answer image
Thank you for reaching out to us. The Invacare Tracer EX2 16" x 16" Frame With Removable Desk Length Arm Wheelchair comes with removable desk length adjustable height.
Customer Care - 3/11/2016 6:49:54 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*

 
SubmitCancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopwheelchair.com

Close