Med-Lift 30 Series Lift Chair
Med-Lift 30 Series Lift Chair

Med-Lift 30 Series Lift Chair

Brand/Manufacturer: MED-LIFT & MOBILITY INC.
Authorized Retailer Badge
  • Made in USA

Med-Lift 30 Series Lift Chair has a split back design that offers very good lumbar support. It is designed for a person from 5 feet 4 inches to 6 feet 2 inches. The backrest features a more contemporary style with the double horizontal stitching instead of the button-tufted style. 30 Series Lift Chair has a magazine pocket on lower outer right-hand side.

Buy this product and earn 45.45 Reward Dollars.

  • Color
    View Color Swatches
  • Recline Positions
  • Vibrators And Heat
  • Chaise Pad
  • Optional Accessories
  • Delivery Option
  • Total: $1250
    Total: $909
Total: $1250
Total: $909

Give me a Better Price


  • Med-Lift 30 Series Lift Chair has a fiber filled back
  • Uni-construction of seat-back assembly is independently lab-tested for strength and durability
  • Corner blocks are used throughout the chair at all critical points for added strength
  • Low volt quiet motor
  • Hardwood frame
  • Acella-Flex¬†foam seating
  • 5 no sag seat spring
  • Magazine pocket on right side
  • Arm and head covers
  • 6 Positions Vibrators and Heat option and Ultra Ezz massage must have a chaise pad
  • Construction material:
    - Fiber 5%
    - Foam 10%
    - Fabric 10%
    - Steel 30%
    - Fasteners and Miscellaneous 5%

More Information

  • Chair Frame:
    - All kiln dried hardwood
    - All stress points are kiln dried oak
    - All joints are glued and connected with steel fasteners
    - Uni-construction of seat-back assembly independent lab tested for strength and durability
    - Gang nails are used at all other critical joints or stress points
    - All bolts used are grade 5 (and we are the only lift chair company that uses grade 5 bolts)
    - Bolts go entirely through the wood
    - No lag screws are used to secure the mechanism
    - Each mechanism is secured by special locking T-nuts to insure that the mechanism stays tight throughout the lifetime of the chair
    - All critical connection points for reclining hardware, etc. have a double locking nut, nylon aircraft grade locking nut
    - All wood screws that are used are the best and strongest available
    - Corner blocks are used throughout the chair at all critical points for added strength
    - An extra rail is used across the top of the seat back to help keep the back straight and square
  • Acella-Flex foam:
    - Foam used in all chairs is Acella-Flex, which was developed by Leggett and Platt for use in better upholstered furniture
    - Acella-Flex foam is the closest thing to a perfect seating configuration in the industry
    - This foam basically pushes back one pound for every pound of weight exerted against it. This characteristic makes the chairs, basically, sit the same for a person of 90 lbs. or a person of 300 lbs.
    - Acella-Flex will keep 99.9% of its original shape and size.
    - Most conventional foam will shrink 10-15% in size over the first couple of years.
    - Med-Lift uses a special break-in process before the foam is ever cut to make the foam feel good from the first use forward.
    - As an added benefit to foam, a super soft layer is glued on top of the Acella-Flex which gives a very nice feel to the seat, while still giving the Acella-Flex base for strength and long life. This feature also makes the seat foam pressure reducing.
  • Seat Springs:
    - 9 gauge Morley system, no sag springs
    - The springs are tied together with tie wire to make every spring work together as a seat unit
    - Seat springs are correctly spaced on the spring rails by a special clip rail machine
    - The front seat rail on the frame is larger and thicker than the competitors; products, which makes the seat much stronger and durable
    - There is a retainer rail secured by steel brads on top of the seat springs to ensure they do not loosen
    - The back springs used are 12 gauge, and are also tied together with special tie wire for more comfort and endurance
    - To ensure the seat springs do not cut into the bottom of the seat foam, a nova bond pad is used
  • Back Fiber:
    - The fiber used in the back is a dustless, odorless, non-allergenic, conjugated fiber, which is the best in the industry
    - This feature makes the back retain their original shape and gives greater comfort when seated
    - All fabric used on the Med-Lift chairs meets both Cal 117 and UFAC requirements of flammability, and they are tested yearly
  • Lift Base:
    - The foundation of the chair is the lift base.
    - After testing all the lift bases, it has been determined that the Super Sagless lift base (made in the USA) is the best.
    - While more expensive, it will withstand constant use and abuse of a lift chair.
    - A lift base must be as wide as the base of the chair.
    - Super Sagless base used is the most stable base in the upright lifted position.


 Options3053 (3 Way)3053W (3 Way Wide)
Overall Width32"35"
Overall Depth42"44"
Overall Height41"44"
Overall Reclined Length70"73"
Front of ottoman to Back of Seat41"43"
Seat Width between arms21"24"
Seat Depth21"22"
From Seat to Top of Arm55"
Seat Height from Floor20.5"22"
Back height from Seat27"27"
Ottoman Height from Floor22"22"
Weight capacity375 lbs400 lbs


Lifetime warranty on wood frame, lift mechanism and reclining hardware, 4 years warranty on remainig items

Customer Reviews

Questions & Answers

question image
We just came from the store. It is late at night. So we cannot call the store. Should this recliner have 1 or 2 cords to plug in. We cannot get it to work
Lesley - 11/17/2014 10:13:58 PM
answer image
Please note that this recliner needs one cord to plug in.
Customer Care - 12/20/2014 5:09:06 AM
Please enter your and your friends email address below.
Fields marked with * are compulsory

The selected product information has been successfully emailed to your friend.

Thank you for using